[6pack] TR6 Dizzy

If I understand what you are describing and it is outside the dizzy, its a noise supression cap for the radio and yes it should fine to leave as is. 

Lou
------Original Message------
From: Joe Laurito
Sender: 6pack-bounces at autox.team.net
To: TR-6 list
Subject: [6pack] TR6 Dizzy
Sent: Aug 31, 2009 10:10 AM

I'm getting ready to install a Pertronix unit in the distributor of my '75
TR6. The current circuit has a red and a white wire from the harness going
to the plus side of the coil and a black wire coming off the plus side of
the coil going to a blue can (capacitor?) that is grounded to the coil
mounting bolt. That last item is not shown on the wiring diagram applicable
to that year. When I mount the Pertronix, should I keep or remove the blue
component?

Joe
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as lfm614 at aol.com