[6pack] seeking easy TR6 windage tray & oil baffle design

[Rick Patton]

Hi,

I did add windage tray and baffle as Kastner suggested. You can see the 
project photos at: http://topshamautoparts.com/tr6/Fall2003.htm

So far so good four years later. I should mention that the oil pan is about 
the lowest part of the car hanging down below the frame by a good inch. It 
has scraped a couple of times but other than a few scratches it looks fine. 
You just need to be mindful of the clearance.

Rick Patton
Brunswick, Maine
75TR6sci
75 TVR 2500M project
http://pattonmachine.com/



----- Original Message ----- 
From: "Cregg Cowan" <cregg.cowan at sri.com>
To: "Robert Lang" <lang at isis.mit.edu>
Cc: <6pack at autox.team.net>
Sent: Wednesday, September 03, 2008 2:49 PM
Subject: Re: [6pack] seeking easy TR6 windage tray & oil baffle design

>>>Fellow Sufferers,
snip
>>>I'm wondering if there's an easy design for a windage tray and/or oil
>>>baffle --- my favorite roads are twisty I worry about oil starvation.
snip