[6pack] PDWA O-rings

[Foster, Stan]

The last time I recall this coming up our buddy Vance said:

-----Original Message-----
From: owner-6pack at Autox.Team.Net [mailto:owner-6pack at Autox.Team.Net] On Behalf
Of Navarrette, Vance
Sent: Monday, January 22, 2007 1:54 PM
To: ronald weber; 6pack at autox.team.net
Subject: RE: PDWA Seals

        Ron:

        I rebuilt mine using Buna o-rings and a new copper washer from
the hardware store. I use DOT 5 and have for over a year. The PDWA is
still leak free and seems to be working just fine. I LOVE the fact that
the fluid will not damage paint.
        I went through the o-ring bins at the hardware store until I
found some that were a good fit (took the PDWA with me to the hardware
store). So far this seems like a working strategy.
        'Course next time I step on the brakes it all might go KABLOOIE!
and my 6 and I become just another ugly statistic. Personally I thrive
on the danger - it makes me feel *manly* - but you may not feel
likewise.

        Cheers,

        Vance
        aka "Danger Man"


-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com at autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com at autox.team.net] On Behalf Of
forzion at maine.rr.com
Sent: Friday, June 06, 2008 1:50 PM
To: 6pack at autox.team.net
Subject: [6pack] PDWA O-rings

Hello list;

Can someone tell me if there is a good source for o-rings for the PDWA? Is a
special o-ring material suggested for use along with DOT 5 ?

Thanks for any help.

Cheers!

Dave
CF25194UO
Maine