Steve,
Thanks, the non-adjuster slides work fine and these are tight and not installed
but just sitting on the bench, should I expect them to loosen up upon
installation on the seats and in the car?
Sent from my iPhone
> On Sep 1, 2014, at 12:12 PM, Steve Hanegan <steve@betterwitnesses.com> wrote:
>
> No, this is not normal, and I assure you that the car did not leave the
> factory or the dealership in this condition - and there is no need to "start
> filing" (just makes things worse!). I would start by loosening all fasteners
> that hold the seat tracks to the seat frame and the tracks to the car body,
> then, move the seat fully back and forward to allow the bits to self align,
> then re-tighten the fasteners. There should be some resistance, but the seat
> should be easily adjustable throughout its' range. Make sure that there is
> some lubricant on the tracks as well.
>
> Steve H.
>
>
>> On Sep 1, 2014, at 9:05 AM, Mgmike62@gmail.com <mgmike62@gmail.com> wrote:
>>
>> The seat slides with the adjusters are very tight, is this normal or do I
>> start filing?
>>
>> Sent from my iPhone
>> _______________________________________________
>> Zmagnette mailing list
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/zmagnette/steve@betterwitnesses.com
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/mgmike62@gmail.com
>
_______________________________________________
Zmagnette mailing list
Archive: http://www.team.net/archive
|