I thought I'd toss this question out to the lists. Please make sure your
reply goes to Dewey <BDDesRoch@aol.com>. Thanks!
--Andy
Andrew Mace, President, The Vintage Triumph Register
<www.vtr.org>
============
In a message dated 4/7/2001 6:51:42 PM Eastern Daylight Time,
BDDesRoch@aol.com writes:
> Sir, This is a first time, front suspension repair job for me.(1966 TR4A)
> With the repair kit came shackle pins for the lower, outer fulcrum. My
> problem is that the original trunnion assembly/shackle pin appear to be one
> piece and the pin is actually a bolt (a nut on one side only and bolt head
> on
> the other, just like the one in the repair kit). Now maybe due to age it
> just
> looks like one piece but I tried to press it (vice) and even applied a
> little
> hammer persuasion, to no avail. With the pin (bolt) affixed (or so it
> appears) to the trunnion assembly I can't separate it from one side of the
> wishbone.
>
> Please advise as I'm stumped.
>
> Dewey DesRochers
> Battle Ground WA
///
/// vtr@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to vtr@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|