vintage-race
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

26T Wheel for Cosworth Engine

from [Derek Harling] [Permanent Link][Original]
To: Vintage Race <vintage-race@autox.team.net>
Subject: 26T Wheel for Cosworth Engine
From: Derek Harling <derek.lola@home.com>
Date: Sat, 04 Nov 2000 13:39:06 -0500 
Need 26 tooth wheel for water pump on Cosworth BDD (BDA) Atlantic engine
-
 - 26 teeth
 - 3.06 diam
 - 1.50" wide (could be less)
 - for .625" (or .500") shaft.

Used with Cam drive belt - 1" wide x 3/8" tooth spacing.

There's got to be some somewhere!
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • 26T Wheel for Cosworth Engine, Derek Harling <=
Previous by Date:  Re: accusumps, Brian Evans
Next by Date:  Lotus Elan/Cortina dry sump?, PaceCars
Previous by Thread:  Re: Fiberglass fenders for Datsun roadsters., Bill Ironside
Next by Thread:  Lotus Elan/Cortina dry sump?, PaceCars
Indexes:  [Date] [Thread] [Top] [All Lists]