If you canâ??t find the specification for the correct size of the hole, you
have the stock bolts right? Take those with you to the welder.
> On Oct 4, 2020, at 2:09 PM, Jim Henningsen <trguy75@gmail.com> wrote:
>
> Thanks,
> They are aluminum. Good suggestions. Now to know the exact size of the hole?
> Jim
>
>> On Oct 4, 2020, at 4:52 PM, Rye Livingston <ryel@mac.com> wrote:
>>
>> I forget, steel or aluminum? If steel you could weld a washer in place.
>> If aluminum, take it to a welder who is versed in welding aluminum and have
>> it welded over and drill a new hole?
>>
>> Rye
>>
>>> On Oct 4, 2020, at 1:42 PM, Jim Henningsen <trguy75@gmail.com> wrote:
>>>
>>> List:
>>> I decided to take a break on my TR6 engine bay reinstall and work on the 67
>>> TR4A IRS. After dissembling the drivers side rear suspension, I noticed the
>>> hole in the rear of the arm for the shock link is wallowed out. What's the
>>> correct diameter of the hole? I don't have a spare trailing arm to check
>>> and any ideas on creative solution to fix it?
>>>
>>>
>>>
>>> Thanks,
>>> Jim Henningsen
>>> Ocala, FL
>>> 61 TR3A
>>> 62 TR4
>>> 67 TR4A
>>> 75 TR6
>>> 81 TR8
>>> <IMG_6154.JPG>** triumphs@autox.team.net **
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/triumphs/ryel@mac.com
>>
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|