triumphs
[Top] [All Lists]

Re: [TR] TR3 tonneaau revisited

To: <Dave1massey@cs.com>, <triumphs@autox.team.net>
Subject: Re: [TR] TR3 tonneaau revisited
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Fri, 6 Sep 2013 00:19:51 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <40d9b.790ba3ba.3f5a6348@cs.com>
Although my tonneau is for a TR250, the material is used, I fit mine a 
little over two year ago, did it in the warm sun, had to stretch it a little 
and the lift the dots on the front are about as far forward as they can be. 
Although two years is not a lot of time mine seems to have gotten a little 
looser over time, is not bad at all to put on now, used to need a little 
muscle and sun to make it work, less beef and heat is required these days. 
I have been known to push down on the middle when it is all buttoned up and 
sitting out in the sun on a hot day, I think I have stretched it out a bit 
by doing that.

Of course if I were a pessimist I would buy into the old adage, you have two 
choices, "fit it a bit loose, ensuring it will stretch, or fit it a bit 
tight, ensuring it will shrink".

Greg Lemon

--------------------------------------------------
From: <Dave1massey@cs.com>
Sent: Thursday, September 5, 2013 5:44 PM
To: <triumphs@autox.team.net>
Subject: Re: [TR] TR3 tonneaau revisited

> Anyone who makes custom boat covers should be able to do these in his
> sleep.
>
> Cheers
>
> Dave
>
>
>
> In a message dated 9/5/2013 4:56:36 PM Central Daylight Time,
> wbeech@flash.net writes:
>> My old AMCO fit very well, it was just real nasty, Jeff Zorn sent it off
>> and had it duplicated for me.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/glemon@neb.rr.com

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>