triumphs
[Top] [All Lists]

Re: [TR] TR3 Sway bar

To: wbeech@flash.net s=q20121106; t=1369878090; bh=fHvEpQk9GqODJ912dThFWEx0AJWm1PERo+Wum/h8YUs=; h=Received:Received:Date:From:To:Message-ID:Subject:MIME-Version: Content-Type; b=NAIwglmxJ/FP/th9gJR/h0VghkvAGuUdWYFSdNSznV7UZFTFmQ36t79ZqN5LtVZZ4 lnB7enAklalP/LRDjC3XGRL5Kf5S/A4ZcDe/vtX6V/SOc6z3zA/I5utSJ9pajrcAEf xuu/0WPh7hoXNemuEoeN2oSffGdH8hRS/dYTTF+7FgvBdzKuafROgk3tkBTe/58KVR Xr/MHXWdUBcIUCeDcjha5nqzk09mXaiUMvhBe9yX8VqsBYknFszMxFGj5cFFocHHx6 OmDeW488Xi/GWaDceA3t4thtTTDkWH5MmE8KoWGgT/4TVisT1dDMUVNqJOVAXhA7Pp aeuuI7/bHfdPg==
Subject: Re: [TR] TR3 Sway bar
From: davehogye <dlhogye@comcast.net>
Date: Thu, 30 May 2013 01:41:30 +0000 (UTC)
Cc: list Triumph <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
The problem with putting a TR4-TR6 bar on a TR3 is the tires could rub on the 
bar. TR3 bars have 2 bends each side or one close to the frame. Also, some TR3 
bars with one bend, attach to the middle of the lower A-arm. The 2 bend bars 
reach further out on the A-arm for better leverage and effect. 


Dave 

----- Original Message -----
From: "davehogye" <dlhogye@comcast.net> 
To: wbeech@flash.net 
Cc: "list Triumph" <triumphs@autox.team.net> 
Sent: Wednesday, May 29, 2013 3:29:00 PM 
Subject: Re: [TR] TR3 Sway bar 

Definitely add a front anti-sway bar only. 5/8" minimum. I have a 7/8" on my 
TR3 and it works great. The springs and shocks will affect the ride comfort, 
not the bar. I think Addco can supply a bar if you don't find one through the 
main British suppliers. I think TR3 bars are harder to come by than the TR4. 
TR4 will work but it's wider to fit the wider TR4 frame. If you can find one 
for the TR3 specifically, that would be the one to get. Addco will make one for 
you to your specs for a very reasonable price. There are a couple companies 
from the UK that might make one to fit just the TR3, but the price with 
shipping can be an issue. 


Dave H. 

----- Original Message ----- 
From: wbeech@flash.net 
To: "list Triumph" <triumphs@autox.team.net> 
Sent: Wednesday, May 29, 2013 1:01:24 PM 
Subject: [TR] TR3 Sway bar 

As I now have the TR3B to the "Chassis Complete" stage and am waiting on the 
body shop I am thinking of other things I can do. I have determined that an 
anti-sway bar might be a good upgrade at reasonable cost, but I have never 
shopped for nor installed one before. 

What is the List consensus on sway bars? Front vs Rear, should I do both? 
Who are the Good/Better/Best equipment providers? I don't go racing but am 
a fairly spirited country roads driver. 

Many thanks, 
Bill 

Bill Beecher 
'58 TR3A TS/30766L "Tarbaby" 
'62 TR3B TCF/2549L " Aunt B" (in rehab) 
<http://www.triumphowners.com/1566> www.triumphowners.com/1566 
'68 Land Rover Series IIa 88" "The Beast" 
"Keep Calm and Carry On 

** triumphs@autox.team.net ** 

Archive: http://www.team.net/archive 

** triumphs@autox.team.net ** 

Archive: http://www.team.net/archive 

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>