There's an alternate method of grounding the rack! And one Jack would like,
I'll bet.
Dave Massey
-----Original Message-----
From: Tom Note <tom628@verizon.net>
To: Dave Massey <dave1massey@cs.com>; triumphs <triumphs@autox.team.net>
Sent: Sun, May 12, 2013 12:35 am
Subject: Re: [TR] TR6 ground wire..
Ahhh... that explains why mine works : I installed the quick ratio rack
with the alloy mounts which apparently provide an adequate ground.
Tom
----- Original Message -----
From: "Dave Massey" <dave1massey@cs.com>
To: <triumphs@autox.team.net>
Sent: Saturday, May 11, 2013 6:40 PM
Subject: Re: [TR] TR6 ground wire..
> That provides the ground for the horn button. Since the rack is mounted
> in
> rubber there is no reliable ground for the steering and the horn may not
> work.
>
>
>
>
> Dave Massey
>
>
>
>
>
>
> -----Original Message-----
> From: McGaheyRx <McGaheyRx@aol.com>
>
>
> ...the one that comes out of the wiring harness in 2 strands and attaches
> via ring terminal to the bolt on top of the steering rack - what purpose
> does this serve?
> I am installing a NEW steering rack which has no provision for attaching
> any wire to it and it is not immediately obvious to me whether i need to
> attach that wire to some other ground point - or ground the rack at some
> other
>
> point - or both?
>
> Thanks,
> Jack Mc
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/tom628@verizon.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|