triumphs
[Top] [All Lists]

Re: [TR] Question on gear reduction starter wiring

Subject: Re: [TR] Question on gear reduction starter wiring
From: "Randall" <TR3driver@ca.rr.com>
Date: Sat, 27 Apr 2013 21:33:01 -0700
Cc: <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Thread-index: Ac5Du85VXWLpZMkUTyOJaC4ldV+sEAADMLMQ
> I believe they all have an internal solenoid.
> 
> Here are some wiring options:
> 
> http://britishstarters.com/Wiring_Diagram.html

FWIW, I went a different route than either diagram shows.  The solenoid
inside the starter draws a good deal of current, roughly 6 times as much as
the original, and I wasn't confident of the original switch's ability to
handle the extra current (and extra kick-back) on a regular basis.  I also
wanted to keep the original solenoid functional (the button on the back
comes in really handy from time to time); but it had lost part of it's smoke
when the original starter failed.

So, I used the original solenoid to switch power only to the new solenoid.
I moved all of the original wires from the top stud to the bottom stud
(making the wire to the starter hot all the time), and ran a new wire from
the top stud to the solenoid stud on the new starter.

Best of both worlds, IMO.  That was in 2000, and both the switch & the
solenoid are still working great (they got moved from the wrecked TR3A to my
current TR3 along with the starter).

-- Randall 

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>