triumphs
[Top] [All Lists]

[TR] Knock off torque

Subject: [TR] Knock off torque
From: jmitch at snet.net (John Mitchell)
Date: Sat, 07 Jan 2012 16:15:13 -0500
References: <20120107202242.8FFCE187899@autox.team.net>
On Lay Leno's garage, there's a video segment with a similar tool.  The 
makers argument is that it's safer with a wrench and with a known 
torque, you won't be over tightening.  Take a look.
http://www.jaylenosgarage.com/extras/tools/knockoff-spinner-tools/


On 1/7/2012 3:22 PM, spook01 at comcast.net wrote:
> It occurs to me that the nuts are designed to be self tightening..that's why 
> you don't hammer the c**p out of them.  Over tightening actually damages the 
> cone in the wheel and on the hub, and can induce wobble.
> Just a thought.
>
> Sent from my Verizon Wireless Phone
>
> ----- Reply message -----
> From: "Randall"<TR3driver at ca.rr.com>
> To:<stag at digest.net>, "'Triumph List'"<triumphs at autox.team.net>
> Subject: [TR] Knock off torque
> Date: Sat, Jan 7, 2012 13:03
>
>
>> I bought a tool that will allow me to use either a torque wrench or
>> breaker bar for putting on and taking off my 2 eared knock
>> offs.  It's
>> for my TR6 and Stag
> How did your Stag wind up with 2-eared knock offs?  They had "safety"
> knockoffs originally (but otherwise the same size&  thread as TR6).
>
>>   How can I find
>> out a proper torque specification for putting on the nuts?
> I doubt the factory ever published a spec, as they specifically said to use
> a hammer.  But one approach would be to install them with a hammer and then
> measure how much torque it takes to remove them.
>
> -- Randall
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spook01 at 
> comcast.net
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jmitch at 
> snet.net

<Prev in Thread] Current Thread [Next in Thread>