I bought an IR 223 (1/2") and a 251 (3/4") 25 years ago. Both made in Japan.
The 223 still works okay but the 251 died two months ago with some parts no
longer available. I did replace the 251 with a Harbor Freight unit but I
know it won't last as long. I can see myself going back to a traditional
name when the HF unit dies. All the maximum torque ratings you see are
laughable - it's like seeing an ad for a 1 HP grinder that "develops" 2.5 HP
yet only draws 5 amps. Check out your local NAPA or other similar type of
store - they may have specials on trade grade air tools including brand
names.
Alex Thomson
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Sujit Roy
Sent: Friday, January 06, 2012 3:25 PM
To: Triumphs
Subject: [TR] Recommendation for an impact wrench
Can any one recommend one for the old job. Harbor Freight seems to carry
inexpensive ones. What should I look for in one?
Thanks, Sujit
--
Sujit Roy, Realtor
Keller Williams Realty, Cupertino, CA
(408) 839-8359
roysrealty.com
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/aljlthomson at charter.net
|