triumphs
[Top] [All Lists]

[TR] FW: TR3 Reverse Lamp - revisited plus my plans for the week

Subject: [TR] FW: TR3 Reverse Lamp - revisited plus my plans for the week
From: don.hiscock at gmail.com (Don Hiscock)
Date: Mon, 26 Dec 2011 13:28:09 -0600
References: <000101ccc401$48885f50$d9991df0$@net>
Carl, the rear lamp looks nice.  How do you think it will affect your
clearance on ramps, if at all?  Looks a little vulnerable from the pic.

Don
TSF202L

On Mon, Dec 26, 2011 at 1:05 PM, Carl TR <cfmtr3a at verizon.net> wrote:

> Following Chris' comment I made a modification to the switch mounting.
> New image at:
>
> http://i1001.photobucket.com/albums/af136/cfmtr3a/Information%20Items/RevSwi
> tch-1.jpg
>
> The cover is made from the 'bucket' mounting for a windshield washer pump
> (it was a damaged pump) and a coil plug wire boot.  Fit perfectly.  Now I
> won't have to worry about a stray water spray hitting the hot side of the
> switch.
> Mount is still at:
>
> http://i1001.photobucket.com/albums/af136/cfmtr3a/Information%20Items/RevLam
> p.jpg
>
> Hope all is well with everyone this day after Christmas.   I am off all
> this
> week so I am hoping to make great strides in getting the project done.
>  I'll
> be finishing up the seat re-assembly today as well as working on the never
> ending battle of the under-dash electrics.   Next (after electrics) is the
> floor insulation and carpeting.  I bought a small piece of high temp
> (1750d)
> heat insulation (http://www.summitracing.com/parts/DEI-050508/ ) to place
> between the exhaust system and the floorboard/tunnel areas plus a product
> called EZCool (http://www.lobucrod.com/ ) to install under the carpet.
> We'll see if they help with the heat buildup.
>
> Enough for now.
> Carl
>
> -----Original Message-----
> From: triumphs-bounces at autox.team.net
> [mailto:triumphs-bounces at autox.team.net] On Behalf Of Chris Simo
> Sent: Saturday, December 24, 2011 12:40 PM
> To: triumphs at autox.team.net
> Subject: Re: [TR] TR3 Reverse Lamp
>
> Looking good. Is the switch made for outside function?
>
> I like the lamp as well. I found a lamp that looked OK at a vw bug catalog.
> Close to correct period, too. I'll be wiring it up during the holidays to
> the reverse switch on the Toyota transmission (hvda).
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/don.hiscock at gmail.com

<Prev in Thread] Current Thread [Next in Thread>