triumphs
[Top] [All Lists]

[TR] modifying a reamer for carb shaft

Subject: [TR] modifying a reamer for carb shaft
From: mmarr at notwires.com (Michael Marr)
Date: Thu, 17 Mar 2011 19:27:16 -0500
References: <2043832973.2635823.1300332901422.JavaMail.root@sz0119a.emeryville.ca.mail.comcast.net>
Tool and die makers are skilled journeymen, who generally grind their own 
cutting tools and who are accustomed to making one-off tools.  A tool and 
cutter grinder may be a semiskilled worker who basically loads and unloads a 
tool grinding machine, with a skilled worker actually doing the set-up.  I 
stand by my original post.

Mike

----- Original Message ----- 
From: <pethier at comcast.net>
To: "Michael Marr" <mmarr at notwires.com>
Cc: "Greg Gelhar" <greg at gelhar.com>; "Gary Nafziger" <nafzigerg at 
yahoo.com>; 
<triumphs at autox.team.net>
Sent: Wednesday, March 16, 2011 10:35 PM
Subject: Re: [TR] modifying a reamer for carb shaft


> From: "Michael Marr" <mmarr at notwires.com>

> In other words, you would pull the reamer through the holes rather
> than
> pushing. I would certainly not try to add the required cutting edge
> by
> hand, but a tool-maker could do it fairly easily, if you know one that
> is
> willing to do some "government" work...

The person you are looking for is a "tool and cutter grinder".  Just look 
for the guy with the grinder marks on his safety glasses. :-)


Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack"
2004 Suburban 8.1
2005 Lotus Elise
2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net
http://www.flickr.com/photos/pethier
http://www.triumphtransamerica.org
http://www.mnautox.com


<Prev in Thread] Current Thread [Next in Thread>