Hi Bob,
I'm leaning towards no seals because they didn't seem to be originally
installed. Just wanted some experienced input and wondered if anyone had
installed them anyway, and with what results. Thanks for the reply,
you're confirming my decision.
Brian
On 2/27/2011 10:06 AM, Bob wrote:
> Brian,
>
> Again, I am not a Spitfire expert but it the Spit engine is anything like a 3,
> 4 or 6 there are no seals on the valve stems if the engine is stock.
>
> I have heard of seal kits for 6's but no experience here. My 72 is stock and
> all I did was install hardened exhaust seats and bronze guides. Same with my 3
> and 4.
>
> There are many Spitfire experts on this list so I am guessing you will get
> some expert replies soon.
>
> Best of luck and welcome to our world!
>
> Bob
>
>
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|