triumphs
[Top] [All Lists]

Re: [TR] Teflon washers in SU Carbs -The scoop

To: D&B Lambert <blambert@socal.rr.com>, Triumph List <triumphs@autox.team.net>
Subject: Re: [TR] Teflon washers in SU Carbs -The scoop
From: HANS DEFERRANTE <tr3@roadrunner.com>
Date: Fri, 18 Jun 2010 17:34:05 -0700
Hi Dennis and Randall,

I spoke with Walt from Britalia and this is the scoop and advise I got:
The green  o-rings are not teflon. They are actually made for the air  
conditioning  industry and are available from A.C. supply houses. As  
far as he is concerned they have no particular advantage over the  
neoprene o-rings such as available from Moss or hardware stores.
His recommendation was to polish the brass jet tube with rouge, tooth  
paste,  or polishing compound to a gloss and, if necessary, remove  
any visible blemishes with a rubbing compound. Lubricate the tube and  
washers with a thin layer of synthetic grease before installation.
I followed his advise and used the "Moss" washers and a grease with a  
high content of teflon (on the bottom gland washer as well), which  
did not to come off with gasoline.  It is a bit early to judge, but  
so far it has worked perfectly --- dry as a bone --- and the jet  
slides up and down very easily.

Dennis,  -- I have been trying to get a hold of a friend who had an  
A.C. business, to find out about those mysterious green washers and  
who is also an excellent mechanic. If he thinks it has some merit  
I'll get some for you too.

Hans


On Jun 14, 2010, at 6:41 PM, D&B Lambert wrote:

> Hello Hans,
> I got some o-rings from Britalia (in Fullerton) that replace the  
> neoprene
> cup washers that Moss sells.  They are green instead of black.  Not  
> sure
> what they are made of, and I haven't tried them yet since the ones  
> I got
> were the wrong size.  Of course I can't blame Walt - we were in the  
> shop one
> afternoon discussing the leaking problem, he reached into a parts  
> drawer and
> gave me 4 green o-rings - gratis (don't tell anyone)  :) .  One day  
> I'll get
> back there and purchase the correct ones.  If you do get some from  
> Britalia,
> perhaps you could buy 4 extra and I'll get them from you the next  
> time I see
> you at an event or at a TRSC meeting, at which time I'll reimburse  
> you of
> course.
> Thanks, Dennis Lambert
>
>> -----Original Message-----
>> From: triumphs-bounces@autox.team.net [mailto:triumphs-
>> bounces@autox.team.net] On Behalf Of Hans de Ferrante
>> Sent: Sunday, June 13, 2010 4:10 PM
>> To: Triumph List
>> Subject: [TR] Teflon washers in SU Carbs
>>
>> Re: 1961 TR3a with S U, type H6 carbs.
>> I heard during a TR gathering, that there are teflon washers  
>> available
>> in lieu of the old cork or neoprene cup washers that seal the jet. It
>> seems that the  leaky carbs with the consequential gas (sorry,  
>> petrol)
>> smelly garages and sometimes houses is quite a common complaint. I
>> have tried soaking the cork washers in oil as long as 3 days, but it
>> helped only temporarily; the neoprene washers helped but made the
>> choke hard to operate. Could not find anything in the Moss or  
>> Victoria
>> catalogs or on line, other than that they were standard on the later
>> types and probably not the same.
>> Has anyone ever tried these and with what results?
>>
>> Thanks,
>>
>> Hans deFer

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>