triumphs
[Top] [All Lists]

Re: [TR] Repairing Cloisonne badge

To: "Foster, Stan (HP IT)" <stan.foster@hp.com>,
Subject: Re: [TR] Repairing Cloisonne badge
From: Mark Hooper <mhooper@digiscreen.ca>
Date: Tue, 18 May 2010 23:12:42 -0400
Hi Stan:

Thanks for the link.

And to think I was in the neighbourhood in January.

Still, I am really trying to avoid making Grandpa's axe (it's already too
close to Frankenstein's monster) :^)

I'll have a go at fixing the original, but at least I know there is a backup
in case of disaster.

Cheers,

Mark

________________________________________
From: Foster, Stan (HP IT) [stan.foster@hp.com]
Sent: May 18, 2010 2:53 PM
To: Mark Hooper; triumphs@autox.team.net
Subject: RE: Repairing Cloisonne badge

You can get a new enamel badge for around $50 plus shipping. See 1st page in
the TR Shop flyer.

http://www.trshop.co.uk/special.html



-----Original Message-----
From: triumphs-bounces@autox.team.net [mailto:triumphs-bounces@autox.team.net]
On Behalf Of Mark Hooper
Sent: Saturday, May 15, 2010 12:22 AM
To: triumphs@autox.team.net
Subject: [TR] Repairing Cloisonne badge

My TR6's grill badge needs repair. A fair bit of the enamel has come away,
although the rest of the badge (chrome etc) is in very good shape. Has
anybody
had good luck filling in with some readily available substance? Epoxy etc?
POR+topcoat?

Somehow I suspect that I should avoid scraping out the entire badge and then
getting black glass powder and firing in a kiln...

MarkHooper

1972 TR6

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>