> Is there anything special that has to be done to replace the seal or
> can I just remove the nut and flange, replace the seal, reinstall
> flange and then torque the nut?
Should be no problem on your TR4, Brad. The collapsible spacer didn't come
in until later.
However, I would examine the sealing surface of the flange carefully. If
you can feel the groove left by the old seal with your fingernail, I would
suggest a Speedi-sleeve.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|