I was surprised when my attempt to pull the rubber fuel
line from the fuel pump on my Spit actually pulled out the
(brass?) fitting instead. I tapped it back in with a
block of wood, and it seemed to be tight, but when I
tested it with the engine running it pulled out on its
own. Not good! The pump itself is fine, so I'd like to
make a fix if possible. Is there some product that will
let me secure the line in its slot, or does this have to
be a pressure fitting?
Thanks,
Tim
Clinton, SC
1980 Spitfire
1974 TR6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|