> Anyone have a longer term (read "forever") solution making this out of
another
> material?
I made one for the TR3 racecar from 2024-T3 aircraft aluminum alloy. It came
from Charlie Vogelsong at Dillsburg Aeroplane Works.
I laid the old shroud on the sheet and traced around it with a Sharpie, then
cut it out using a nibbler and aviation snips. I actually made it in three
pieces, held together with small bolts/fiber lock nuts.
After lots of filing, trial fitting, and bending, it came out beautifully. I
painted the front body color, but polished the back.
John H.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|