> Here's the problem, as I see it. There is only one vacuum
> take-off from the manifold, and that of course is taken by
> the breather. Any suggestions as to what I could/should do please?
The manifold is relatively soft aluminum, so easy to drill and tap for
another fitting. I've added several ports to my TR3A.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|