Just a thought, but as I recall, there are some washers/gaskets of some
type, fiber, if I remember correctly that go on the pressure relief valve.
If you don't get those back on the same way, it may change the adjustment.
Sorry abouot the lack of specificity, I just remember trying to replace
those for some reason when I took mine out to clean.
Bob
----- Original Message -----
From: <DLylis@aol.com>
To: <tony@tonydrews.com>; <triumphs@autox.team.net>
Sent: Tuesday, March 17, 2009 12:25 PM
Subject: Re: [TR] TR3A oil pressure
> Tony,
> I am befuddled by the increase in pressure as the oil warms. I was not
> too
> keen on backing the pressure off a false reading, but now I have two
> gauges
> that tell me the same thing. I am going to adjust it back a bit.
> Any hint as to why this is happening, or should I just be thankful for
> good
> oil pressure and move on?
>
> David
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|