triumphs
[Top] [All Lists]

Re: [TR] TR3A oil pressure

To: DLylis@aol.com,triumphs@autox.team.net
Subject: Re: [TR] TR3A oil pressure
From: Tony Drews <tony@tonydrews.com>
Date: Tue, 17 Mar 2009 09:50:17 -0500
Sounds like when you cleaned it you ended up with it set a little 
higher.  I'd back it off a bit.

- Tony

At 09:38 AM 3/17/2009, DLylis@aol.com wrote:
>My (formerly) newly rebuilt 3A motor has excellent oil pressure.  My  gauge
>read 65 lbs at idle upon startup and ran about 80 lbs driving.  Warm  motor
>idle was at 50 lbs. Twice now, the pressure has dropped to 20 -30 at 
>idle  and
>shutting off the car and waiting returns it to the previous readings.   The
>driving pressure is as before.  Stuck pressure relief, you say. 
>I  agree, so it
>removed it and cleaned it and all seemed well. Something 
>odd  happened, however,
>which is counter intuitive.  Now, as the motor warms up  to operating temp,
>the pressure increases to 70 at idle and 85  driving.    I 
>questioned the gauge
>so I changed it for  a SunPro and I get the same readings.  I have a spin on
>adapter and an  oil cooler on this car.
>I know the pressure is high and intend to adjust the pressure relief once I
>see what makes sense here.
>
>Thoughts?
>
>David  Lylis
>69 TR6 CC26160L
>60 TR3A TS74461LO
>**************Feeling the pinch at the grocery store?  Make meals for Under
>$10. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000002)
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>You are subscribed as tony@tonydrews.com
>
>http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>