Adrian,
It's just as well that you didn't find your Haynes, and I quote: "The
handbrake linkage comprising a system of cables and levers operates on the
rear brakes only and usually requires no separate adjustment." [Haynes TR
2,3,3a4 & B4a guide]
What you have described below is exactly how I would do it.
Another lister wrote "Pull the handbrake up three clicks and adjust the
wheels until they are tight, then back the brake lever off." I have never
done it that way but it might work just fine.
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of
Adrian Jones
Sent: Tuesday, May 13, 2008 7:43 PM
To: triumphs@autox.team.net
Subject: [TR] Adjusting the TR3 rear brakes
Hi folks,
I hate to impose such a simple request but I cannot find my Haynes manual
anywhere. I must have spent the last 2 hours looking for the damn thing -
even the good wife joined in - she even knows what it looks like.
The problem is that the handbrake doesn't stop the car moving. I'm thinking
I have to first adjust the back brakes, individually, so the wheels spin
freely but are locked solid with foot brake applied. Then take up any slack
in the handbrake cable. Have I got got that right?
I've done this before but CRS.
Cheers, Adrian TS 58325
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|