Hi "PaPa" Jim....apparently you have achieved a new status in life.
The TR2/3 conversion is unknown at this time, but you will go on the list
for further information. Someone may be needed for trial installation.
Uncle Jack & Joe
> Hi Joe,
> I have a set of Miata seats to put into my 3a, and would be thrilled to have
> a pre-fabbed way of doing it.
> Please put me on your list, if you have one,
> Thanks,
> Jim Wallace
>
> PS In doing a trial placement, they will need to be something like 1 1/2" up
> from the floow, in order to gain enough width at the transmission tunnel.
> For sure the attached-to-the-seat female end for the seatbelts had to go for
> teh same reason.
>
>
</HTML>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|