The correct method to affix them is to tighten the aluminum piece down flat,
so they shouldn't rattle. Other than that, I don't know what to say.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces+auprichard=comcast.net@autox.team.net
[mailto:triumphs-bounces+auprichard=comcast.net@autox.team.net] On Behalf Of
L1J1S@aol.com
Sent: Sunday, May 04, 2008 3:36 PM
To: triumphs@autox.team.net
Subject: [TR] tr3 bonnet dzus fastners
list, with respect to the tr3 honnet dzus fastners, is they are way one can
prevent the paint from chipping due to the dzus fastners? i have noticed
that
on many tr3's that after awhile the fastners rattle and causes the paint to
chip away? larrry schwartz 1960 tr3-a
**************Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as auprichard@comcast.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|