Hi all,
Just to update after receiving advice- ordered and fitted my new control box
after cleaning the contacts with some mineral spirit, start engine- charge
straight away-13.6volts at the battery, really pleased.
Spent some time setting up the carbs, mixture and balance, ran the engine for
about 30mins in total, but water pump is still weeping from around the seal,
hoping this may bed in and stop. Is it possible to fit a pump without
removing the rad and nose? Just thinking of when is it safe to replace the
nose.?
Thanks all till the next time
John
1954 TR2
Anorak Q: Why do I have three marks on my dipstick, two close together near
the
end of the stick and one much higher up, over half way?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|