> Looked at the GT6 front end. The right wheel has been
> clunking a little when I wobble the top of the wheel. At the
> last inspection the guy had trie dto tell me it was the ball
> joint. But I've never felt any play in the ball joint and it
> seemed to be the bearing. So I'd tightened it once already.
> Took the whole thing apart today, everything looks good,
Jim, this might not be relevant but it's something to think about. Few
years back I had similar problems with my TR3A. Finally traced the problem
to the stub axle, which was no longer round where the outer bearing race sat
on it ! Changing the stub axle solved the problem.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|