don't let the condenser off the hook. if it is not "sized" properly the
points will pit up right away, and if you think the parts guy has the right
one, well........... if the transfer of material is from the ground to the
positive the condenser is either too big (or too small, i can never remember
which, and now-a-days it dosen't much matter) but that's how you tell which
way to go in sizing it. i think i have the proper information somewhere, and
i'll look for it if need be
jim
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|