Oil Ways -flushing 6.25.0.62; VDF: 6.25.0.107; host: imx2.tcd.ie)

Before I start re assembly of the TR2 engine, I want to flush out the 
oil ways in the block and crank. (my machine shop decided I might 
like to do this instead of them!). Any advise on this would be 
welcome. i.e do I remove all the bolts on the block gallery, is there 
any danger removing the allen screws from the crank, what is the best 
solvent etc.., Thanks
John
-- 
John Gillis
Senior Conservator
Library Conservation
Trinity College.
College Street.
Dublin 2.
IRELAND.

Phones: 6081149 or 6081137 mobile: 086 1556589