I am writing to report that I purchased a canvas top for my TR6 from AA Best
and have just finished installing it. I am very happy with the fit and
finish of it. There are details on it that were either missing or had fallen
off of my old beat up vinyl top. For example, there is a little tail of
canvas at the front side corner that the door closes on to keep the side in
place. And the zipper on the window is concealed on both the inside and
outside. The only thing I would recommend is this: the snaps came installed.
They piece that wraps around the rear bow is a bit difficult to snap and the
side snaps are just a tiny bit off. All in all though, the job looks good
for a first time installer..
Two questions:
1. There are little plastic strips haning from the top of the window near
the sides. What the heck are these for?
2. The side seals don't come in contact with the window in any way. Are they
supposed to? Did I install poorly or did they design poorly?
3. OK THREE questions. Did I read somewhere that you can go over the rear
window with a hair dryer to remove little dimples?
Thanks,
Hugh Fader
72 TR6
|