Dave,
I probably mis-communicated originally... turn signals do NOT work with
ignition off - which should be proper. My Hazard Flashers work in this config.
When I reconnected the voltage stabilizer I got them to work as well with
ignition on. So, I have a turn signal problem it appears - except the the
HAZARD
flasher doesn't flash with ignition ON, just lights all four lamps solid. I
believe my next step (after once again checking all connections) is to create a
jumper to bypass the hazard switch to check the turn signal wiring. I keep
feeling like this is some simple thing I haven't reconnected, or like you say
wired the switch wrong, but I believe I've checked multiple times.
Thanks for the suggestions
Micky Long, Atlanta
72 TR 6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|