triumphs
[Top] [All Lists]

RE: Ign advance and cam phasing for TR4

To: "'Randall Young'" <ryoung@navcomtech.com>, triumphs@autox.team.net
Subject: RE: Ign advance and cam phasing for TR4
From: "Stewart, Scot (GEAE)" <Scot.Stewart@ae.ge.com>
Date: Fri, 27 Jun 2003 14:32:08 -0400
It's probably more this than spring deterioration.  What don't you know
Randall!!  Thanks for all the advice and knowledge!

-----Original Message-----
From: Randall Young [mailto:ryoung@navcomtech.com]
Sent: Friday, June 27, 2003 2:24 PM
To: triumphs@autox.team.net
Subject: RE: Ign advance and cam phasing for TR4


> Randall wrote:
>
> (it's never been calibrated and
> they do go up as they age),

R. Ashford Little II asked :
> Why is that Randall?  Just curious.

Besides the tired spring that Scott mentioned, wear in the bushing also
allows the magnets to run closer to the cup on one side.  Since the magnetic
field is a square law, it gets stronger on one side faster than it get
weaker on the other side, so there's more total force transmitted to the
cup.

In severe cases of course, the magnets actually drag on the cup, making the
unit read wildly high instead of just a bit.

Randall

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>