Hi,
I am trying to degree in a cam and noticed the cam gear has enough play
in the bolt holes to move 3degs in either direction. Is this normal. The
bolts seem to be standard without a larger than normal shoulder. This
may be built in to the gear to fine tune because both sets of holes are
the same.
If any one have experience in this area I would greatly appreciate some
help. I have been stuck trying to degree this cam in for a few days and
the summer is waiting.
Thanks , Mitch
75 TR6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|