triumphs
[Top] [All Lists]

RE: I've got a hole

To: "'Jerry Greenberg'" <jerrygreenberg@earthlink.net>, "'Darrell Walker'" <darrellw@ipns.com>, "'Jay Snable'" <jsnable@mac.com>
Subject: RE: I've got a hole
From: "R. Ashford Little II" <ralittle2@mindspring.com>
Date: Tue, 13 May 2003 19:09:20 -0400
Cc: "6-Pack" <6pack@autox.team.net>, "Triumphs@autox. Net" <Triumphs@autox.team.net>
Thanks to all who responded.  I am going to take you up on your
fiberglass/temporary solution.  I plan on getting the whole car painted
down the road, and at least I will know one thing that needs attention
and won't be surprised.

It's just a PITA to be poking around the floorboards, actually vacuuming
to reinstall the carpet, and to find this hole.

Arghhhh...

R. Ashford Little II
www.geocities.com/ralittle2


-----Original Message-----
From: Jerry Greenberg [mailto:jerrygreenberg@earthlink.net] 
Sent: Tuesday, May 13, 2003 6:30 PM
To: R. Ashford Little II
Subject: Re: I've got a hole

I don't know how large the hole is but a temporary fix until it is
replaced is to use fiberglass repair kits found at auto parts stores.
It doesn't need to pretty if you replace the floorboard. I've used the
kits myself. They usually include fiberglass mesh material and bonding
and hardening agents. I had this stuff on one of my cars during
college and it was still there several years later when I sold the car
to a friend. He had it for another 3-4 years and the fiberglass was
still there, filling up a hole in the trunk area.
----- Original Message -----
From: "R. Ashford Little II" <ralittle2@mindspring.com>
To: "6-Pack" <6pack@autox.team.net>; "Triumphs@autox. Net"
<Triumphs@autox.team.net>
Sent: Tuesday, May 13, 2003 5:04 PM
Subject: I've got a hole


> OK, we'll dispense with the "you should've known better" parts of
the
> discussion, but I'm in need of advice.  I've got a hole in my
driver's
> side floorboard.  It needs to be replaced, BUT it can't be done
today.
> So, what to do?
> I'm wondering if there is a temporary solution to this issue.
Something
> akin to "shoe goo" to temporarily fill the hole until I replace the
> floorboard.  I don't even need it to be pretty since the floorboard
is
> gone anyway.  The area in question in at the left front portion of
the
> driver's side floorboard.  The car is garage, and only gets when
during
> washing and the occasional unexpected rain shower.  Ideas?  Options?
> You can see pictures of what I'm talking about on my website, which
is
> listed below.  Just click on the "Latest issues and questions" link
at
> the top of the page.
> Thanks very much.
>
> R. Ashford Little II
> www.geocities.com/ralittle2

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>