Thanks Rick:
>From the silence I was beginning to think I had posed the unanswerable
question. I hate polishing things up and then finding them all rusted a
little later.
Cheers,
Mark
-----Original Message-----
From: Rick Barnard
To: mhooper@pixelsystems.com; Triumphs@Autox.team.net
Sent: 30/10/02 7:52 PM
Subject: Re:metal varnish
Hi Mark,
Eastwood's "Nyalic" is a fuel and heat resistant clear coat
spray for brass, aluminum and SS. It is less effective on bare
steel, but otherwise has held up nicely in my engine bay going on 5
years.
Regards,
Rick 1973 TR6 CF2570U
>I am planning to do a little buffing and polishing this winter. This
will
make me feel better because I can't afford to do the buying and
installing
that I would like to. :^(
So, that being said, what is a good clear metal varnish that will last
in
the engine compartment? I am talking about buffing carbs, fuel
pump, intakes
etc...
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|