Hi Bill. Do you mean the vertical channels that the window slides up and
down in? Moss sells replacement channel material. It cost about $30 to do my
car. You have to remove the channel from the assembly and rivet in the new
channel. Or you can buy new channel assemblies for about $50 each.
- Hugh
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of Williams, Bill
> (Atlanta)
> Sent: Wednesday, October 30, 2002 12:26 PM
> To: triumphs@autox.team.net
> Subject: TR6 Windows
>
>
> Hi All,
>
> On the way to the SE VTR, my driver's side window popped out of the
> channel. I have not yet taken the door panel off.
>
> However, when I pull the window out of the door, I see there
> is a black
> sticky tape or adhesive on the bottom that, I assume, keeps it in the
> channel.
>
> Where can I find that stuff, or is there something from Home
> Depot that
> I can pick up and use?
>
> Thanks,
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|