> Specifications have always been to fill the hub with
> grease and fill the cap that goes over the nut.
Where exactly are these specifications, Peter ?
>From the Official Triumph TR2 & TR3 Driver's Instruction Book (1st Ed) (as
reprinted in the Bentley manual) :
"Recharging the hubs with grease on later models involves removing the hubs,
washing the bearings to remove all traces of the old grease before liberally
coating the rollers and races with new grease."
There is no mention of packing the cavity, or filling the dust cap.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|