Message text written by "Kinderlehrer"
>Pardon my ignorance, again, please. I am trying to install an electric
fan
and I want to wire it up with a relay. I got one from Pep Boys (I found it
on the shelf for about $5.00 after buying a VW relay from NAPA for $15. I
think I'll return that today). They both have 3 terminals and neither has
a
wiring diagram. I am guessing that it goes like this:
Relay:
B- goes to a 12 volt source (In-line fuse goes on this wire)
L- goes to the fan
S- goes to the switch (I'm going to use a manual switch for now)
Switch:
t1 - goes to relay terminal S
t2 - goes to ground
Fan:
l1 - goes to relay terminal L
l2 - goes to ground (or the other way around to get the fan to push in the
right direction)
Do I have this right?
I think this was addressed, but I must have filed it along with those
memory
cells that knew where.
<
Sounds right. If you have a volt meter you should be able to read about 50
ohms between terminals B and S.
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|