triumphs
[Top] [All Lists]

Re: Things you learn

To: Jim Muller <jimmuller@pop.mail.rcn.net>, <triumphs@autox.team.net>
Subject: Re: Things you learn
From: Michael Ferguson <fergie@ntplx.net>
Date: Sat, 22 Jun 2002 20:37:30 -0400
Cc: bob Sachs <BobSachs@bytewizards.com>, <banjo2k@itech.net>
User-agent: Microsoft-Outlook-Express-Macintosh-Edition/5.02.2022
Could it be that Item 10 has something to do with Items 1-9?

:^)

Michael Ferguson
1959 TR3A  TS53990L...O
There is a very fine line between 'hobby' and 'mental illness.'...Dave Barry


> From: "Jim Muller" <jimmuller@pop.mail.rcn.net>
> Reply-To: "Jim Muller" <jimmuller@pop.mail.rcn.net>
> Date: Sat, 22 Jun 2002 20:28:59 -0400
> To: triumphs@autox.team.net
> Cc: bob Sachs <BobSachs@BYTEWizards.com>, banjo2k@itech.net
> Subject: Things you learn
> 
> Things you learn (eventually) when you spend enough time working on a
> Triumph:
> 
> 1. A drop light (a.k.a. safety light) is the most perverse device
> ever invented.  It will roll around on the floor of a car so as to
> point its light either (a) at the floor, or (b) at your face, but
> nowhere else.
> 
> 2. Lightbulbs, even shock-resistant "work bulbs", blow out with the
> slightest provocation such as a mild bump.  This happens just as
> readily to the 4th bulb as to the 1st, even after you have supposedly
> learned your lesson.
> 
> 3. The markings on a socket that indicate its size will always be
> 3/4ths of the way around on the other side.
> 
> 4. You will always rotate the socket the wrong way.
> 
> 5. A nut you are attempting to tighten will become too hard to turn
> with fingers long before it becomes tight enough to prevent a ratchet
> from backslipping.
> 
> 6. That 8-inch ratchet extension you need to tighten the bolt at hand
> will always be found to have been left on the other side of the car.
> 
> 7. The difficulty of re-threading a bolt/nut combination in an
> awkward location is inversely proportional to the ease with which it
> came apart.
> 
> 8. You can never find in your toolbox the one special tool that would
> really help with the job at hand until you have given up and solved
> the problem some other way.  Then the tool will miraculously appear
> at the top of you toolbox, exactly where you thought it was.
> 
> 9. A dropped nut or washer will always roll into the most
> unobtainable place between frame members or under a tire.
> 
> 9. After you have successfully mated the gearbox input shaft to the
> clutch splines and started tightening bolts to prevent everything
> from slipping apart, you will discover that the ground strap is
> trapped between bell housing and engine block.
> 
> 10. Beer tastes very very good.  Which probably explains why I can't
> count to 10 properly.
> -- 
> Jim Muller
> jimmuller@pop.rcn.com
> '80 Spitfire, '70 GT6+

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>