Message text written by INTERNET:davidt@opentext.com
>Thanks for the info, I should have clarified, I have a relay for the the
fan
itself and it is hooked to main circuit with an inline fuse. I also have a
thermostat in the rad as a switch for the relay, I am looking for a
switched
circuit to provide power to the thermostat to activiate the relay. Not
much
power required, just an accessable switched circuit.
<
Then you an use the green wire as Randall suggested or the white wire as I
suggested. The advantage to the green wire is it is protected and the
advantage to the white wire is you will still have a cooling fan if the
fuse blows. Your choice.
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|