Control head

[RTriplett@bjservices.com]

Re inability to remove control head wiring, I had the same problem with a
parts car I was dissassembling.  Heating the tube did the trick, but be
very careful, as the fuel line is in close proximity.  Additionally, the
chemicals sprayed into the tube might be flammable.  I used a torch, but a
heat gun might do the trick in your case.
Regards,
Richard Sr.

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///