Oops, transposed the digits: Make that "89"
-Bryce
----- Original Message -----
From: "Bryce Milton" <Bryce@milton.com>
To: "Graham Stretch" <technical@iwnet.screaming.net>; "Triumph List"
<triumphs@autox.team.net>
Sent: Monday, August 14, 2000 12:30 PM
Subject: Re: Pin holes in floor pans
>
> "Thousand points of light" was a line from one of President Bush's
> speeches (back in '98?) and was a reference to individuals with civic
pride
> serving their communities that spawned charitable organizations such as
> http://www.pointsoflight.org/ (as well as a few jokes as I recall :-).
>
> -Bryce
>
> ----- Original Message -----
> From: "Graham Stretch" <technical@iwnet.screaming.net>
> To: "Triumph List" <triumphs@autox.team.net>
> Sent: Monday, August 14, 2000 12:16 PM
> Subject: Re: Pin holes in floor pans
>
>
> >
> > Hi Joe
> > Ok I'll ask, why the George bush method?
> >
> > Graham.
> >
> > ----- Original Message -----
> > From: "Joe Curry" <spitlist@gte.net>
> > To: "Pat" <pleask@mailhost.wlc.com>
> > Cc: "TRlist" <triumphs@autox.team.net>
> > Sent: Sunday, August 13, 2000 3:20 PM
> > Subject: Re: Pin holes in floor pans
> >
> >
> > >
> > > Pat,
> > > If you have a brazing torch and some patience, you can use the George
> > > Bush method of repairing the pinholes.
> > >
> > > Here's how it works:
> > >
> > > Jack the car up so that you can put a high intensity lamp under the
> > > floor. Turn off the garage light and you will have the 1000 points of
> > > light to guide your repairs. If the holes are really small, you can
> > > just fill them with a little brass rod. Larger holes may require a
> > > little metal patch brazed over it.
> > >
> > > You will know that you are finished when you have extinguished all
> > > thousand of the points of light.
> > >
> > > Regards,
> > > Joe
> > >
> > > Pat wrote:
> > > >
> > > > I have some pin holes in the floor pans of my Project TR3. The PDO
put
> > in
> > > > "new" pans years back but did not use the factory ones.
> > > >
> > > > He did a good enough job that I just can not bring myself to fully
> > remove
> > > > them nor do I have the money to do so.
> > > >
> > > > Any idea's what I can smear over the pans to seal them up ?
> > > >
> > > > Thanks,Pat
> >
>
|