RE: TR6 was fuel now ignition

[David Massey <105671.471@compuserve.com>]

Message text written by "Jim Altman"
>Any ole wire will do, but make sure there is enough flex and play to allow
for advance and/or retard to move the plate and position of the wire.
<

The ground wire used in this application has very many very fine filaments.
 Tis is to accomodate the continual flexing that results from the action of
the vacuum advance/retard unit.  If you use a typical wire (eg:speaker
wire) it will quickly fatigue and break.  Give it a month or two.  (Ask me
how I know)

But it will last until you get the new wire you order.  (Unless it is on
back order!)

Dave