This could be.. I don't have an example in the garage anymore and was
working from memory... They are evenly spaced - I do remember that... Can
someone else confirm inboard/outboard?
Carl
-----Original Message-----
From: Geo Hahn [SMTP:geohahn@azstarnet.com]
Sent: Tuesday, February 22, 2000 7:35 PM
To: Musson, Carl
Cc: 'Jeff.A.Williamson@jci.com'; 'TR-List'
Subject: Re: TR3A Top Frame Mounting Question
"Musson, Carl" wrote:
There is a longer peg (about 3/4") which is placed on the outboard
edge of
the top strap. The other is a flat head machine screw of the same
size -
maybe shorter.
On mine the lift-the-dot peg is on the inboard side. I can't swear this is
original but if mounted this way the pegs in each direction are evenly
spaced (about 6¼" apart) which looks right to me.
Geo Hahn
59 TR3A
Tucson, AZ
|