| To: | amdixon@erols.com |
|---|---|
| Subject: | Re: Tr3A valve clearances - Clickadjust |
| From: | KTRIUMPH@aol.com |
| Date: | Wed, 14 Apr 1999 20:17:01 EDT |
| Cc: | triumphs@autox.team.net |
In a message dated 99-04-14 07:05:17 EDT, you write: << Need a little help on TR3A valve clearances. Original manual and Bentley reprint don't give any differences between the TR2 ands TR3 engines (I = .01; E = .012). This is correct for early motors. Glenn's indicates that the TR3 is I and E both .01; Clymer's gives TR2 and TR3 as BOTH being .01. This is correct for TR3 and later... What are you folks running? >> 10 thou on all. Ken Nuelle 58 TR3A 62 TR3B 64 TR4 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | TR6 seat slide O-rings, James Luke |
|---|---|
| Next by Date: | Re: TR4 Convertible top Question, KTRIUMPH |
| Previous by Thread: | Re: Tr3A valve clearances - Clickadjust, George Hahn |
| Next by Thread: | Re: Tr3A valve clearances - Clickadjust, Michael Thompson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |