the covers that VB sells are the TriumphTune covers. They are not
cheap...and I have one on my car. The difference you see is that VB
purchases the covers without the logo on them. These I believe might have
a deeper fin pattern, but it really depends on how the guy running the
mill over the top was feeling that day.
aaron
On Fri, 15 Jan 1999, Peter Zaborski wrote:
>
> There appear to be several options for aftermarket valve covers for the TR6
> (and 6 cyl Triumph engines in general). The one I am interested in is a
> really heavy cast aluminum cover with fairly thick and tall fins on the top.
> I think VB sells the cover in the US. The Moss covers are quite cheap in
> comparison, at least the ones I have seen. The fins are very short and the
> overall quality is less than desirable IMO.
>
> I have also seen the thick Al cover in catalogs from both Holden Vintage &
> Classic and Europa Specialist Spares, both in the UK.
>
> The question is: does anyone know the manufacturer of these covers? Note:
> they are NOT the Triumph Tune covers Moss sells -- those ones are the
> "cheap" looking ones.
>
> Thanks for any help.
>
> --- Peter Zaborski CF58310UO ---
>
>
|