My 72 GT6 has an ECV valve between the breather and the manifold. Most of
the catalogs show NO EVC on a 72, just the breather going directly to the
manifold with a T to the charcoal cannister (just like my son's 72 Spit).
I have no cannister in the engine compartment. However, there is a
cannister in the boot (right sidewall near the marker light). It is a
fairly large more or less rectangular affair with hoses to the tank,
overflow, etc. I don't see any unaccounted ports on this thing so I don't
know where a line from the front would connect.
I can't find a refrence that shows this type cannister. Does anyone know
how it should be "wired" or know where this may be documented?
Thanks, Sam
|