Re: pathological wheel bearings

[Jim Faulkner <jrf@lanl.gov>]

>Date: Tue, 02 Jun 1998 08:58:53 -0600
>To: A.Nugent@unsw.edu.au
>From: Jim Faulkner <jrf@lanl.gov>
>Subject: Re: pathological wheel bearings
>
>Allen,
>
>Maybe one (or both) of the bearing races (driven into the hubs) are not
completely seated. If this were the case, tightening the adjusting nut each
time would take up the slack until the race moved slightly closer to its
seat after running a bit. Just a thought.
>
>Good luck.
>
>Jim Faulkner
>Los Alamos, NM